Easy Fudge Recipes that Make Wonderfully Edible Gifts (2024)

FAQs

What is the secret to great fudge? ›

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize. Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F).

Evaporated milk doesn't have sugar added. The sweetened condended milk is needed as no extra sugar is added to the fudge. If evaporated milk were used then the fudge would not be sweet enough and also would still be too soft unless the fudge is frozen.

While fudge was not invented on Mackinac Island, it most certainly – and most deliciously – was perfected here.

One possibility is that the ratio of ingredients may be off, resulting in a fudge that is too soft or runny. So make sure you measure your ingredients correctly. Another factor could be the quality of the ingredients used using low-quality chocolate or condensed milk may affect the setting process.

Avoid Stirring Once the Mixture Comes to a Simmer

If you continue stirring once the mixture is simmering, you are encouraging the development of sugar crystals. While crystallization is the goal if you're making hard candy, crunchy sugar bits can quickly ruin a fudge's silky smooth texture.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

The most common culprit behind unset fudge is inaccurate temperature control. If the sugar mixture hasn't reached the correct temperature, your fudge won't set. Ensure you use a reliable candy thermometer and follow temperature guidelines meticulously to achieve the desired consistency.

Secondly, the pot's material should allow for good heat distribution hence your top choice should be copper cookware or a pot with a copper core. Copper's exceptional heat conductivity offers unparalleled temperature control, an asset when working with finicky ingredients like sugar.

To obtain the world famous taste, the fudge is slowly cooked in traditional copper kettles over a gas flame. Once the desired temperature is reached, the mixture is poured onto marble slabs for a cooling period and then hand-paddled into loaves. Joann's Fudge does not contain any preservatives or powdered ingredients.

What makes high-quality fudge? ›

It's the size of sugar crystals that makes the knees of fudge lovers buckle…the smaller the crystals, the less they are perceived on the tongue and the more the fudge tastes smooth and creamy. Cooking, and beating after cooking, is the key to successful fudge.

As Mackinac Island evolved from a center of fur trade into a summer resort destination, Victorian-era vacationers began to identify the island with sweets. At first, the most common candy was maple sugar harvested by Native Americans. Other treats, including fudge, soon followed.

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

OPTION 4) If you think the reason it didn't set was because you didn't heat it to the right temperature, you could try putting it back into the pan and re-cooking.

Fudge can turn into caramel due to overcooking or undercooking, incorrect temperatures, or wrong ingredients.

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

The key to creamy, luscious fudge is controlling crystal formation. If the sucrose (table sugar) crystals are small, the fudge will feel creamy and smooth on your tongue. But if the crystals are large, the fudge develops a crumbly, dry, or even coarse texture.

Beating the cooled batter is one of the crucial steps of fudge-making, but overbeating can turn fudge hard as a rock. Pay close attention to the change in appearance and only beat the fudge until it loses its glossy sheen.

So, the key to smooth yet firm fudge, pralines, and fondant is to first bring the mixture to a high enough concentration and then let it cool off somewhat before starting to stir. And once you do start to stir, stir fanatically and without stopping for the finest, creamiest texture.